Verified Quality on Every Part
When you order from Texlon, our in-house 3D scanning catches dimensional issues before they reach your dock.
±10 µm Traceable Accuracy
Measurement data traceable to PTB national standards.
AI-Automated Scanning
One-click 360° capture. AI selects angles, stitches data, suggests measurements.
CAD-to-Part Comparison
Color-mapped deviations across the entire surface. Warpage and sink caught immediately.
Inspection Reports Included
Pass/fail reports to Excel and PDF — included with your order.
Repeat Inspection Programs
Saved programs run the same inspection part after part. Zero setup.
Non-Destructive Cross-Sections
Internal wall thickness measured without cutting the part.
Full-Surface Deviation Mapping
Traditional tools check individual points. The VL-800 captures the entire part surface and overlays a color-coded deviation map against your CAD — green is in spec, yellow is trending, red is out.
These aren't abstract data tables — they're visual proof your parts match design intent. Included with your order at no extra charge.
- 800K+ Points per scan
- < 40s Full scan time
- ±10 µm Accuracy
From Prototype to Verified Part in Days
Texlon's in-house 3D printing and aluminum prototype molds already get first parts in your hands fast. Adding VL-800 scanning to that workflow means you get verified prototypes — not just parts, but parts with full dimensional data proving they match your CAD.
The typical prototype-to-validation cycle takes weeks when you're shipping to an outside inspection lab. We do it all under one roof — your design iteration loop collapses from weeks to days.
- 3D print or mold a prototype — scan it the same day
- Full CAD comparison report generated in minutes
- Catch design issues before committing to production tooling
- Iterate faster: adjust, reprint, rescan — all in-house
- Prototype inspection data feeds directly into production QC programs
How We Use 3D Scanning on Your Parts
First Article Inspection
First shots scanned and compared against your CAD to confirm every dimension.
Multi-Cavity Comparison
Cavity-to-cavity variation detected. We fine-tune based on actual scan data.
Warpage & Shrinkage
Full-color 3D deviation maps quantify the problem for data-driven adjustments.
Mold Wear Monitoring
Parts scanned at intervals to catch wear before out-of-spec production.
Dispute Resolution
Objective 3D scan evidence eliminates ambiguity and resolves disputes fast.
Consistency Tracking
Baselines built at first article and monitored throughout production.
